 |
How to root and flash custom recovery on Micromax Unite 2? |
Unite 2 (A106) is from one of the most popular phones by Micromax & more than 1 million units of this device were sold within the year of its launch. Unite 2 features 4.7 inch IPS Touchscreen and is powered by 1.3Ghz MTK 6582 chipset along with 1 GB of RAM. Primary camera is 5 megapixel shooter while the front shooter is 2 megapixel. Device is powered by 2000 mAh battery. The performance of the device is decent and almost lag free. Follow this tutorial to root and flash recovery on Unite 2 with a proper guide to install custom ROM(s) on the device.
NOTE- THIS METHOD WORKS ONLY ON UNITE 2 RUNNING ON KITKAT.
WHAT DO WE NEED?
- Unite 2
- Drivers Click Here.
- SP Tools Click Here.
- MTK6582 Scatter file Click Here.
- Recovery file (CWM) Get Here
- Supersu.zip Click Here.
- A PC/Laptop
THINGS TO REMEMBER
- Take a backup of your data and apps before starting the process.
- Make sure that battery is at least 65-75% charged.
- USB Debugging must be enabled. For this go to Settings -> About Phone tap on build number several times to enable the Developer options in your device. After that open Developer Options in the settings and enable the USB Debugging.
- Drivers must be installed properly.
ROOTING AND FLASHING RECOVERY
STEP 1- Transfer the Supersu.zip file into your memory card and disconnect your device from PC/Laptop.
STEP 2- Switch off your device, take out the battery and connect it to your PC/Laptop by USB Cable (*Battery removed).
STEP 3- UNZIP the SP tools zip file and right click on the Flash_Tool.exe to run as administrator.
STEP 4- In SP Tools, click on Scatter Loading it will open up a new window. Browse to the path where you have downloaded
MT6582_Android_scatter_emmc.txt and select it.
STEP 5- Lot of checked boxes will appear. Click on the RECOVERY check box only and make sure no other check box is marked.
Click the Recovery inside it to open a new window, then browse to the downloaded Recovery.img file and select it.
STEP 6- Click on download. A warning message will appear just click on 'OK' when completed a green conformation circle will appear.
Now your device have CWM recovery installed in it.
STEP 7- Disconnect your device from PC/Laptop put the battery press following keys-
Volume UP+Volume DOWN+Power buttons together to boot into CWM recovery.
STEP 8- Click on install zip from SD card and select the Supersu.zip and flash it.
[GUIDE]FLASHING ANY CUSTOM ROM(S)
Download any custom ROM for your device that you want to flash and place it in your device SD Card and follow the following
steps.
- Boot into recovery mode.
- Wipe Data/Factory.
- Wipe Cache
- Go to advanced to wipe system and data.
- When done then choose the option install zip from SD card.
- Select the ROM zip file and select YES.
It will take a while to boot with a the new ROM that you've installed so just wait. Once your phone starts enjoy
with your new ROM.
That's all, If any problems faced in the process above, then please let me know by commenting down below or via goodweknowSupport form, will be happy to help you asap.
0 comments:
Post a Comment